FORGOT YOUR DETAILS?

Haven't found what were looking for? Call us! +48.882-357-864

GTB2565VKLR Ball Bearing Billet Wheel GEN II TDI Big Turbo vacuum converted and welded onto stock 1.9 2.0TDI

1,899.00 incl. tax

Description

Ceramic Ball Bearing GTB2565VKLR hybrid using Billet Wheel GEN II based on turbocharger from Mercedes 3.2 CDI V6 is the ultimate choice for the 1.9 & 2.0 TDI for someone looking for a fast driver.

GotTuned’s GTB2565VKLR Ball Bearing hybrid turbo is a vacuum converted turbo with a manifold from VAG 1.9TDI, 2.0TDI so that it fits a majority of transverse and longitudinal engines with following codes:

BKD, AZV, BKP, ECE, PDE, BSY, ALH, ASV, ASZ, ARL, BLT, BPX, AHF, ARL, ATD, AVK, AUY, AJM, AVB, AJM, AHH, ATJ, AFN, AWX, AFV, BGW, BLB, BPW, etc.

What’s so special about this one?

1. Fast spool thanks to:

– Genuine Garrett ceramic Ball Bearings.
– Custom enlarged GTB25VKLR 49/51mm turbine wheel, 33gram lighter than stock GTB22VKLR!
– The newest second generation of Billet Compressor Wheel, + ~6% more HP than GEN I!

2. Higher air-fuel ratio and higher peak torque at low engine speeds.
3. Lower manifold pressures at high RPMs.
4. 3rd generation Variable Nozzle Turbine.
5. We sell this hybrid with VKLR installation kit including:

– the oil line feed with oil restrictor,
– the oil line return,
– the water line feed,
– the water line return,
– the downpipe flange.

6. Ceramic Genuine Garrett Ball Bearings.
7. Oil + water cooling.
8. Precisely VNT adjustment.

The four things needed to install our GTB2565VKLR are as follows:

– modification of your current Downpipe (flange for 1.9/2.0 TDI is included in the kit!),
– modification of pipes going to the compressor housing,
– modification of the oil line return,
– water lines installation (from heating coil go 2 water lines – you can connect with them).

The turbo is meant to work with +400HP, boost 40PSI. In order to reach that level of power you need to adjust your fuel, exhaust and cooling systems as well.


When it comes to the fuel injectors, we recommend FIRAD HF160 PD Injectors (1190,00 EURO). These parts are available on demand.


Please tell us which vehicle and manifold the turbocharger will be fitted into and we will set up the turbo accordingly. We need usually ~ 10 working days to send this turbocharger.

We are able to do electronic actuator conversion in GTB and GTD series as well ( BorgWarner/KKK and Garrett/Honeywell). Ask about details.


 

Reviews

There are no reviews yet.

Be the first to review “GTB2565VKLR Ball Bearing Billet Wheel GEN II TDI Big Turbo vacuum converted and welded onto stock 1.9 2.0TDI”

Your email address will not be published. Required fields are marked *

TOP